| Location | Meadowbank |
| Manufacturer | Performance Power |
| Model | PAG600 |
| Weight | 8 |
WHAT IT DOES
Angle grinders work by rotating a disc at very high speed to cut or grind material using abrasion. Depending on the disc used, you can cut metal, brick, stone, mortar and other masonry; grind metal; clean off rust; or prep metal for welding.
Angle grinders work by rotating a disc at very high speed to cut or grind material using abrasion. Depending on the disc used, you can cut metal, brick, stone, mortar and other masonry; grind metal; clean off rust; or prep metal for welding.
Takes 115mm discs
SAFETY INFORMATION & PPE
This is a powerful tool. Be mindful of your surroundings. Ensure the object you are working on is securely held in place. Angle grinders can be dangerous tools if not used properly. The most common accidents include kickbacks and flying sparks. Hold the grinder firmly in two hands. When using cutting discs, use only the edge of the disc. Sparks are normal when cutting steel. Be sure to use the right attachment for the job and if you are not experienced try to use it for easy tasks. Never change a disc with the cable plugged in.
YOU MAY ALSO NEED
HOW TO USE IT
Don’t try to cut with a grinding disc, or grind with a cutting disc! Fit the right disc for your project.
Start the tool using the trigger buttons - there is usually a safety double trigger. Both need to be pushed for the tool to start.
Make sure the grinder is at full speed BEFORE making contact with your object.
Go gently at first so you get a feel for the tool and how it reacts when you apply pressure to your object.
Here is a useful guide we would recommend to read through beforehand: https://www.wikihow.com/Use-an-Angle-Grinder#Choosing-and-Applying-the-Right-Attachment-for-the-Job
INSTRUCTIONAL VIDEOS
Note this video is a general introduction and is not specific to this exact tool. We always advise reading the manual if provided below, especially the safety advisories, before using any tools.
This is a powerful tool. Be mindful of your surroundings. Ensure the object you are working on is securely held in place. Angle grinders can be dangerous tools if not used properly. The most common accidents include kickbacks and flying sparks. Hold the grinder firmly in two hands. When using cutting discs, use only the edge of the disc. Sparks are normal when cutting steel. Be sure to use the right attachment for the job and if you are not experienced try to use it for easy tasks. Never change a disc with the cable plugged in.
- Safety glasses – Essential
- Ear protection – Essential
- Work Gloves – Essential These can help protect you from the vibration of the tool but also from sparks when cutting steel.
- Dust mask – Recommended especially if grinding
YOU MAY ALSO NEED
- Consumables: Cutting, grinding, polishing or sanding discs/pads – Essential The specific disc/pad you need will depend on the task at hand and the material you work on - will you be cutting, or grinding? metal, stone, granite? The Tool Library can give you these, but it depends on stock-at-hand so you may need to source your own. Ask a volunteer for advice and a demonstration of changing the disc. Here is a quick list of types of discs: grinding discs or cut off discs (for metal and stone), diamond cutting discs (for tiles, mortar raking, slate, marble, granite, abrasive materials, asphalt), abrasive discs/pads, sanding discs/pads, wire brush and twist knot cups, flap sanding discs, polishing pads) For a full guide on how to choose the correct disc read the section “Types of Discs and Attachments for Angle Grinders”. https://www.diydoctor.org.uk/projects/using_an_angle_grinder.htm
- A grinder spanner or pin wrench or pin spanner – Essential if you want to swap or replace discs.
- Extension cord – Useful If you are working far away from a socket.
HOW TO USE IT
Don’t try to cut with a grinding disc, or grind with a cutting disc! Fit the right disc for your project.
Start the tool using the trigger buttons - there is usually a safety double trigger. Both need to be pushed for the tool to start.
Make sure the grinder is at full speed BEFORE making contact with your object.
Go gently at first so you get a feel for the tool and how it reacts when you apply pressure to your object.
Here is a useful guide we would recommend to read through beforehand: https://www.wikihow.com/Use-an-Angle-Grinder#Choosing-and-Applying-the-Right-Attachment-for-the-Job
INSTRUCTIONAL VIDEOS
Note this video is a general introduction and is not specific to this exact tool. We always advise reading the manual if provided below, especially the safety advisories, before using any tools.