| Location | Portobello |
| Manufacturer | Hozelock |
| Weight | 5 |
WHAT IT DOES
The garden hose is commonly used to transport water from a tap through a hose. It can be used to water landscapes, plants, and gardens, to fill outdoor containers with water, or to clean large objects outdoors or hose down dirty pets!
The garden hose is commonly used to transport water from a tap through a hose. It can be used to water landscapes, plants, and gardens, to fill outdoor containers with water, or to clean large objects outdoors or hose down dirty pets!
Garden hose c.13m long with mixer tap connector at one end. Open hose at the other end.
Suitable for use with Karcher pressure washer ETL1310. Note you will need a suitable hose end connector to connect it to the pressure washer.
SAFETY INFORMATION & PPE
YOU MAY ALSO NEED
* a garden hose pipe multi-spray watering gun – Useful If you wish to adjust the water pressure.
HOW TO USE IT
You need to ensure there is no leaks at the connection to your tap. So attach the hose to the water tap using the tap connector. Turn the tap on a bit to check there is no water escaping from the joint. If water is escaping, turn off the tap and reconnect. Once there are no leaks, turn the tap on fully.
Make sure the hose has no kinks or folds or the water will not move through freely.
INSTRUCTIONAL VIDEOS
Note this video is a general introduction and is not specific to this exact tool. We always advise reading the manual if provided below, especially the safety advisories, before using any tools.
https://youtube.com/shorts/hgtw9eds5Ng?si=GHOGmaRAlTx0fieT
- Waterproof clothing – Useful If spraying/cleaning large objects
- Shoes with good grip – Useful Particularly if using large volumes of water/working in slippery areas
YOU MAY ALSO NEED
* a garden hose pipe multi-spray watering gun – Useful If you wish to adjust the water pressure.
HOW TO USE IT
You need to ensure there is no leaks at the connection to your tap. So attach the hose to the water tap using the tap connector. Turn the tap on a bit to check there is no water escaping from the joint. If water is escaping, turn off the tap and reconnect. Once there are no leaks, turn the tap on fully.
Make sure the hose has no kinks or folds or the water will not move through freely.
INSTRUCTIONAL VIDEOS
Note this video is a general introduction and is not specific to this exact tool. We always advise reading the manual if provided below, especially the safety advisories, before using any tools.
https://youtube.com/shorts/hgtw9eds5Ng?si=GHOGmaRAlTx0fieT