£1.00 for 5 days
| Location | Meadowbank |
| Manufacturer | Bosch |
| Model | PSA 700 E |
| Weight | 4 |
WHAT IT DOES
It cuts a variety of materials including wood, metal, plasterboard, hardboard and plastic. With a reciprocating saw, you can start a cut in the middle of a sheet of material (plunge cut) as well as from the edge (cross cut).
A reciprocating saw has a long body with a saw blade sticking out of the end. The saw blade has a back and forth motion to cut through the material, like a handsaw.
Reciprocating saws are useful for demolition and rough cutting but not so useful for trimming material neatly. Have you looked at other saws that might be right for your job?
If you want to make neater more controlled cuts around corners then a jigsaw might be better.
If you want to cut in an absolutely straight line then a circular saw might be better.
It cuts a variety of materials including wood, metal, plasterboard, hardboard and plastic. With a reciprocating saw, you can start a cut in the middle of a sheet of material (plunge cut) as well as from the edge (cross cut).
A reciprocating saw has a long body with a saw blade sticking out of the end. The saw blade has a back and forth motion to cut through the material, like a handsaw.
Reciprocating saws are useful for demolition and rough cutting but not so useful for trimming material neatly. Have you looked at other saws that might be right for your job?
ABOUT THIS TOOL
Compact design and variable cutting speeds for fast flush cuts
Compact size allows for effortless handling
Simply adjust speed to materials with Bosch Electronic for better results
Cutting depth of up to 150 mm
Fast straight cuts and flush cuts in a wide variety of common materials
SDS enables quick and easy keyless saw blade changes for efficient work
Corded (mains powered)
The blade is thicker than that of a jigsaw.
Blade provided - £1 is charged when checking out with a set of blades (wood and/or metal) to help the Tool Library cover the replacement costs
SAFETY INFORMATION & PPE
- Safety glasses – Essential
- Ear Protection – Essential
- Dust Mask – Recommended Safety glasses, ear protection, and other PPE are available for a suggested donation at check out.
- Blades – Essential. You’ll need to use blades especially made to fit reciprocating saws. They vary in TPI (teeth per inch) and you’ll need to use the right type of blade for the material you are cutting. Wood can be cut with a low TPI blade and metal with a high TPI. Remember to unplug the cable before replacing the blade.
- Clamps – Recommended. The saw vibrates a lot as it cuts and it is a good idea to clamp the material you are cutting to a sturdy surface.
- Allen Key – Useful as some saws require these to remove and replace the blade. Newer models have a quick-release function.
- Extension cord – Useful If you are working far away from a socket.
YOU MAY ALSO NEED
HOW TO USE IT
Here is a complete guide on how to use such tool: https://www.wikihow.com/Use-a-Reciprocating-Saw
Remember to unplug the cable before replacing the blade and when operating the tool keep one hand on the handle and one on the front hand grip.
INSTRUCTIONAL VIDEOS
Note this video is a general introduction and is not specific to this exact tool. We always advise reading the manual if provided below, especially the safety advisories, before using any tools.