| Location | Meadowbank |
| Weight | 0.5 |
WHAT IT DOES
Variety box of drill bits used to drill holes in wood, concrete, metal and plastic. Each drill bit will differ. Here is an intro to 22 different types of drill bits to illustrate the idea! https://www.theengineerspost.com/types-of-drill-bits.
Basic rules of thumb:
House shaped tips are for masonry (brick, block, stone, concrete)
Black lip and spur bits have a central point for accurate drilling in wood
High speed steel (HSS) are sometimes coated in titanium or cobalt for a hard cutting tip and longer life, specifically used in metal primarily. Use a cutting oil (3 in 1) to aid cutting
HSS bits, step drills, holesaws, spade bits are also used in plastic and wood Before deciding on the correct bit for your task, make sure you pick the correct hand or power drill or driver. See the guide ‘Choosing power drills and drivers’ to help you with that: https://edinburghtoollibrary.org.uk/guides/#drill
Variety box of drill bits used to drill holes in wood, concrete, metal and plastic. Each drill bit will differ. Here is an intro to 22 different types of drill bits to illustrate the idea! https://www.theengineerspost.com/types-of-drill-bits.
Basic rules of thumb:
Wood boring bits
Sizes 4, 5, 6, 8, 10 ,11, 13mm
Approximately 300mm long
SAFETY INFORMATION & PPE
YOU MAY ALSO NEED
HOW TO USE IT
Not sure about the size? Start with a small drill bit size, and work your way up.
When drilling masonry, sometimes masonry is soft, so start without the hammer action and use it in bursts afterwards if need be.
Smaller drill bits on softer materials work with faster speeds (usually speed 2 on a combi drill). Larger bits require slower speeds (often 1 on a combi drill)
INSTRUCTIONAL VIDEOS
Note this video is a general introduction and is not specific to this exact tool. We always advise reading the manual if provided below, especially the safety advisories, before using any tools.
- Safety glasses – Essential
- Ear protection – Recommended
YOU MAY ALSO NEED
- Pencil, Ruler, Set Square – Essential to mark your workpiece. Measure twice, cut once!
- Clamps – Useful to hold your work securely in place and prevent it from moving.
- Workbench and/or trestles – Useful to not break your back.
HOW TO USE IT
Not sure about the size? Start with a small drill bit size, and work your way up.
When drilling masonry, sometimes masonry is soft, so start without the hammer action and use it in bursts afterwards if need be.
Smaller drill bits on softer materials work with faster speeds (usually speed 2 on a combi drill). Larger bits require slower speeds (often 1 on a combi drill)
INSTRUCTIONAL VIDEOS
Note this video is a general introduction and is not specific to this exact tool. We always advise reading the manual if provided below, especially the safety advisories, before using any tools.
The Edinburgh Tool Library
http://edinburghtoollibrary.org.uk
http://edinburghtoollibrary.org.uk